Acid Potassium Chloride Zinc Electroplating Softener
Potassium chloride type weakly acidic galvanizing electrolyte Potassium chloride type weakly acidic zinc plating electrolyte additives factory Zinc plating brightener Cost saving solution provider Zinc plating bath brightening agent Zinc plating technological process expert Cost saving solution provider Zinc electroplating acid chemical solution additives manufacturer Here are the parts after zinc plated from our client’s workshop Chemical bath brightening agent Process design expert team Professional technical support Production process optimization and improvement
Description
It is characterized by simple electrolyte composition, stable electrolyte, fine coating, bright, high current efficiency, wide operating temperature range (5 ~ 60℃), simple wastewater treatment. The chemical dissolution of the anode in the electrolytic cell leads to the increase of the concentration of main salt ions in the electrolyte.
Common failures and processing method
|
Problem Description |
Probable cause |
Solutions |
|
Poor brightness |
Lack of brightener Lack of softener Organic impurity pollution |
Brightener supplement Softener supplement Activated carbon filtration |
|
Poor coverage No coating in hole and concave
|
Lack of brightener Lack of softener Low potassium chloride The bath temperature becomes higher Aluminum impurity pollution |
Brightener supplement Softener supplement Potassium chloride supplement Lowering temperature Treat with zinc powder |
|
The bright range is narrow and the coating is easy to burn
|
The PH value of the bath increases Lack of zinc Lack of boric acid Lack of softener |
Adjust PH value with dilute hydrochloric acid Zinc chloride supplement Boric acid supplement Softener supplement |
|
The coating has white mist
|
Effect of organic impurities Poor cleaning after plating |
Activated carbon filtration Change the cleaning water |
|
The coating blackening after acid dipping |
Iron impurity Copper impurity |
Hydrogen peroxide treatment and filtration Treat with zinc powder |
|
Roller holes appear in the coating
|
Lack of softener Iron impurity Excessive current Lower zinc Over loading of work
|
Softener supplement Hydrogen peroxide treatment and filtration Lower total current Zinc chloride supplement Reduced loading |
Hot Tags: acid potassium chloride zinc electroplating softener, China acid potassium chloride zinc electroplating softener manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
-
Acid Potassium Chloride Zinc Electroplating Brightener
-
Acid Potassium Chloride Zinc Electroplating Brightener
-
Acid Potassium Chloride Zinc Electroplating Brightener
-
Acid Potassium Chloride Zinc Electroplating Brightener
-
Acid Potassium Chloride Zinc Electroplating Brightener
-
Acid Potassium Chloride Zinc Electroplating Brightener
