Acid Potassium Chloride Zinc Electroplating Brightener

Our main products are chemical additives, which used in manufacture zinc electroplating bath, for improve the brightness of galvanized layer on metal surface. Acid potassium chloride zinc plating brightener, which used in manufacture zinc electroplating bath, for improve the brightness of galvanized layer on metal surface.

Send Inquiry

Description

New product acid zinc plating intermediate
It is a low foaming non ionic surfactant with a high cloud point.
Product Specification:
Chemical name
High temperature zinc plating carrier
Chemical content:
Polyethylene glycol mono(2-ethylhexyl) ether
CAS No.26468-86-0
Properties
Physical form: Colorless to pale yellow transparent liquid
pH: 5.0~7.0
Cloud point ≥45.0%
Water ≤20.0%
Content(%): ≥80.0%
Application
This is a low foaming non-ionic surfactant with a high cloud point. In acid zinc baths,it helps to solve the brightener and improves the deposition at high current density.
Packing
25kg/drum or 200kg/drum, stored in cool and dry place.

20230920161549

Zinc chloride as the main salt, is also a conductive salt, it in the plating solution all ionized into chloride ions and zinc ions, ionized zinc ions will be directly on the plating part of the cathode reduction into a coating, can increase the conductivity of the plating solution, its concentration allowed to change in a wide range. It is easy to absorb moisture, easy to dissolve, exothermic phenomenon.

20230920161435